How to disable or hide the SSID on a Linksys router - Step by step

Who I am
Marie-Ange Demory
Author and references

The SSID is a very significant value because it identifies your Wi-Fi network compared to the others. All Linksys routers set a default SSID and this is essential for securing your network. For this reason, we recommend that you read this article with which you will learn How to disable or hide the SSID on a Linksys router - Step by step

What is the SSID?

SSID stands for "Service Set Identifier" and consists of a primary name assigned to a wireless network (WiFi). This identifier consists of up to 32 alphanumeric characters and often refers to the network name.

What is the SSID for?

The SSID or "Service Set Identifier" is used for identify all packets on the network to which a router is connected. In this way we can differentiate this network from other wireless networks in the area. For this reason it is convenient to configure and improve the security of the connection of a WiFi router in order to take advantage of this resource.

How to disable or hide the SSID on a Linksys router - Step by step

It is essential to disable or hide the SSID on a Linksys router to secure a wireless network. Likewise, it is advisable to hide the WiFi network signal so that the internet is not stolen. If you want to perform this procedure, pay attention to each of the steps that we explain below.

Access the Linksys router settings

If you want disable the SSID on a Linksys router you have to enter the configuration of this device. To do this, log into the web browser of your choice and type in the address bar: «». Press the «Enter» key to bring up the Linksys interface.

Initially, a login is required. If this is your first time accessing the router configuration, write "Admin" (without quotes) for username and password. It is recommended to access the «Administration» tab to establish a new password to protect the network.

Configure the connection

To set up the connection, enter “Setup” and “Basic Setup”. Then check that the second parameter has the PPPoe value. Press the "Save Settings" button if you make any changes to the username and password associated with the Internet service.

Configure the wireless network

If you want to disable or hide the SSID of your Linksys router, you must have previously identified your network. If you haven't already, go to the "Wireless" tab and click on "Basic wireless settings". Select the "Manual" option and enter a name for the Wi-Fi network in the "Network name (SSID)" field. Finally, press the "Save settings" button.

Disable or hide the SSID on the Linksys router

If your wireless network has an SSID or "network name" and you can access the Linksys router configuration and go to the "Wireless" or "Wireless" tab. There you can manage basic wireless settings. Therefore, you can easily change the name and password of your WiFi network.

Next, locate the "Broadcast SSID" or "Broadcast SSID" option and select the option «Disabled» or «Disabled». This way, you can disable or hide the name that identifies your Wi-Fi network. Finally, click on "Save settings" or "Save settings".

What is the purpose of disabling or hiding the SSID on a Linksys router?

The procedure for disabling or hiding the SSID on a Linksys router is to protect your wireless or "Wifi" network by preventing other users from detecting your name when viewing all available Wifi networks.

Therefore, the most intruders will not be able to access the network that easily. However, this alternative is not entirely effective for defending your wireless network as there are some methods that allow you to discover the SSID despite being configured as a hidden or disabled parameter.

EtiquetasTutorial Wi-Fi
add a comment of How to disable or hide the SSID on a Linksys router - Step by step
Comment sent successfully! We will review it in the next few hours.