How To Easily Fix BOOT BCD 0xc00000e9 Error In Windows 10

Who I am
Philippe Gloaguen
Author and references

Windows 10 is prone to errors that interrupt normal operation. For this reason, we recommend that you read this article with which you will learn how to easily fix BOOT BCD 0xc00000e9 error in Windows 10

What is BCD?

BCD stands for Boot Configuration Data. This is a database that works autonomously when you configure the avvio of the Windows 10 operating system.

Before the advent of Windows Vista, the Windows 7 system booted via the boot.ini file. However, in its later version, the file was renamed Boot Configuration Data and is used by Windows Boot Manager di Microsoft.

Cause dell’errore BOOT BCD 0xc00000e9 in Windows 10

Causes of the BOOT BCD 0xc00000e9 error in Windows include misconfigured log files, failure to update system drivers or drivers, damaged storage (hard drives, DVD, USB), incorrect connection or damaged cables and faulty system updates.

How To Easily Fix BOOT BCD 0xc00000e9 Error In Windows 10

As with the 0xc0000018 error while running applications, the BOOT BCD 0xc00000e9 error in Windows 10 prompts you to first detect the source of the error. In this sense it is necessary to follow a series of steps that we explain below.

Create a Windows 10 installation disc

Initially, it is essential to apply a diagnosis and a operating system recovery. To do this, you will need a USB stick with more than 4GB of storage capacity. With this you can create a startup disk where you will save an ISO image of the Windows 10 system.

Access the section " Update and security "From the" Settings "menu and click on" Reset "which you will find on the left side of the panel. There, locate the “Create a Repair Drive” option. Follow the steps presented by the system wizard and you will get the installation disc.  

Repair Windows system startup

Once you've created the Windows 10 installation disc, you need to access the recovery options. To do this, go to the start menu and select “Settings”. Under "Recovery" select the option "Repair your computer". This option will also be found next to the installation disc after accepting Microsoft's terms of use.

 Select the "Troubleshoot" option and then " Startup Repair ". Choose the Windows 10 system and it will immediately start the computer diagnostic process. If the tool finds errors and fixes them, you will have to restart your computer and this will allow you to access the system without problems.

Check the SATA connection cables

Se l’errore BOOT BCD 0xc00000e9 in Windows 10 persiste, you need to check the SATA connection cables and check if they are connected correctly. Also, make sure these items are working properly. Additionally, you can diagnose hardware problems by using tools for this purpose.

Troubleshoot hard drive failures

It is possible that the presence of bad sectors cause the BOOT BCD 0xc00000e9 error in Windows 10. If this is the cause, you need to use the System Check Disk tool. To do this, type cmd in the search engine and right-click on the application. Select "Run as administrator".

Once in the Windows command console, type the following: chkdsk / f / r and press the "Enter" key. Wait a few minutes while are executed il control of disk and error correction. When the process is complete, restart your computer and see if the problem is corrected. 

Access system recovery

If the above steps didn't work, try signing in to a system restore point, that is, when the computer was working normally. To do this, select "Advanced Recovery Options" from the "Settings" menu and click "System Restore".

You will see several restore points with specific dates. Choose one and hit "scan for affected programs". Click "Next" and wait for the Windows recovery process to complete. If you are unable to restore Windows, be sure to create new restore points before opting for this solution.

add a comment of How To Easily Fix BOOT BCD 0xc00000e9 Error In Windows 10
Comment sent successfully! We will review it in the next few hours.