But it's not just what this blue screen looks like, it can also cause your computer to be forced to shut down or restart. Fortunately for everyone, you can fix these system errors in time and get your system back to working properly.
In the next few lines we will tell you what you should do to correct the blue screen showing an uncorrectable error in Windows 10
This specific error describes that there is a hardware problem or failure and the latest updates of Windows 10 need to be downloaded from Windows Update. There are other problems that also produce the blue screen but it indicates another error message, this we have already seen in previously articles.
How To Fix Uncorrectable Blue Screen Error In Windows 10
But even so, if the updates have been downloaded, this problem may not be completely resolved. It is for this reason that we will tell you what you should do, including the update and in this way you have several solutions for this problem. So below we will teach you how to fix blue screen showing uncorrectable error in windows 10.
The first method, of course, is about downloading updates, so let's go to the system settings window. So we have to choose the Update and security option, let's take a good look at this window and select the Windows Update option. And finally we have to choose the Automatic Updates option.
The other method we can use for fix this blue screen problem, in cases where the update has not done so. It is to run a Check Disk, we will do it from the command prompt. This operation is always recommended when we are going to make changes to the configuration of the controllers or components.
To do this we will open the command prompt window, but we have to do it as administrator. We will write the command chkdsk and press Enter, this will check the file system for errors. If it finds any, it will try to correct these errors.
Another solution to fix uncorrectable blue screen error in Windows 10
It is also recommended that you perform a physical check system ventilation as this is a hardware problem. Since their malfunction can cause the different components of our PC to overheat. In this way, the computer cannot function properly.
It is possible that in order to look for better performance of our PC, we have performed an Overclocking, in these cases it is recommended to reset the BIOS. This is so that everything returns to its previous values. To do this we must turn off the computer, turn it back on and enter the BIOS menu and here we will look for the Overclocking option .
Once we find this option, we need to reset all its options, so we need to save the changes and finally exit. If this method didn't solve the problem, let's move on to the next possible solution to the problem.
As we have already seen, this is a related problem all’hardware, therefore it is advisable to check the Driver update. But it is also possible that some update is causing a conflict in the system. So you should check the Windows 10 driver update history.
To check for possible bugs and which one did recently, to revert to a previous version, then check if the problem is fixed. After all these system checks and adjustments, the problem should have been corrected. If it persists, you can check your RAM memory and finally you should reset Windows 10.