How to properly install an SSD hard drive on my PC? - Quick and easy

Who I am
Marie-Ange Demory
Author and references

An SSD hard drive can be very useful to you as it will help you to increase the performance of your PC. In fact, you can migrate system to SSD with AOMEI Partition Assistant or through other tools. For this reason, we recommend that you read this article with which you will learn How to properly install an SSD hard drive in my PC? - Quick and easy

What is an SSD hard drive?

An SSD hard drive is a device used for store data on chip. The technology of this device is based on NAND flash memories and the absence of moving elements that reduce consumption, noise and heat emission.

How do you know if your hard drive is HDD or SSD in Windows? A hard drive HDD has spinning platters. For its part, the SSD hard disk has a particular structure that allows it to be attached to small trays with a different position than traditional hard drives.

What is an SSD hard drive for?

An SSD hard drive is used for data transfers, increasing computer performance through faster system startup and opening applications. An SSD hard drive automatically reallocates bad sectors using additional memory cells and this helps to increase the duration.

How to properly install an SSD hard drive on my PC? - Quick and easy

To put a PC into operation it is essential to perform the correct installation of its components. If you have an SSD hard drive and want to learn how to install it on your computer, pay attention to the procedure that we explain below.

Materials required to install an SSD hard drive

mount an SSD hard drive on your PC you will have need these materials: a screwdriver, an antistatic bracelet, a free power cable (from the power source) and a SATA data cable. With these tools, you can perform the following steps:

Prepare the computer before mounting the SSD hard drive into the PC

First, you need to shut down your computer completely from the operating system or via the switch on the back of the power supply. It's better disconnect the equipment from the outlet di current to avoid damage to components.

Next, it is essential to use the antistatic wrist strap to ground the equipment. With this tool you will avoid the passage of electricity which could cause damage to the devices.

Mount the SSD hard drive on your PC

It's time to find the SSD hard drive and connect it to your computer. The assembly process depends on the tray type. If you have a removable tray, you should check that the pins match the four holes on the hard drive at the bottom. If you have a metal tray, use the holes to hold the disc as well.

Connect to the motherboard to properly install an SSD hard drive in your PC

Find the SATA power cable and connect it to the motherboard or "motherboard". This connector is characterized by having a horizontal L shape. The location of the connector must be taken into consideration to prevent it from breaking. Then connect this cable to the SSD hard drive.

Reconnect the power cord, turn on the computer, and proceed to the process of preparing the SSD hard drive.

Prepare the SSD hard drive

To prepare the SSD, you need to open the BIOS and check that the disk has been mounted correctly. Locate the "Boot" section and make sure the first boot device is the hard drive. Save the changes and reboot the system to perform a clean install on this component.

Once logged into the system, enter the CD from the manufacturer of your SSD hard drive to install. Click on the "Install Now" button. Wait a few minutes while the application completes this process. When you notice that your drive performance has decreased, you can optimize SSD hard drive performance in Windows by managing virtual memory.

TagsTutorial PC
add a comment of How to properly install an SSD hard drive on my PC? - Quick and easy
Comment sent successfully! We will review it in the next few hours.