Many times it is necessary to set the size of a package using the ping tool. This p ara determine if possible increase or check that connection between devices. Pinging is one of the primary tools for seeing how fast your internet connection is and how much is lost in the process between uploading and downloading data.
What should you do to set a packet size using Ping?
In reality, knowing the size of a package is quite simple, it will all depend on the computer and the software you use. There are packages like Linux or Mac that reach around 56 bytes, while Windows has about 32 bytes left, you should know that the packet will always have a few more bytes.
To know the package size of your computer, you have to start a procedure that is recommended, to be read before it is done. First, you have to enter the beginning of your computer, type " terminal “, Click on the application that appeared, this will give you access to the system allowing you to ping CMD in Windows.
Once there, you can see that you have a line to write commands, type “ping -l” not using Windows o “ping -s” if you use Linux or Mac (there are many commands that can be used, so it is recommended to look for the best CMD commands, so as to get better management on Windows).
After the corresponding letter according to your operating system, you need to enter the IP address of the computer or internet connection you want to diagnose. For example in Windows it would appear " ping –l 000.000.0.0”, writing this you must press " Submit ”For the command to be entered into the system.
This allows you to carry out the evaluation. The result appears in seconds, allowing you to see the packet size and whether or not there is data loss.
How to analyze the results when setting a packet size using Ping?
The data provided by the system are of great interest, helping to know if our network or the device in question has a good connection. This system performs the test by sending files from one point on the network to another and vice versa, evaluating the data upload and download speed.
This determines the connection speed between devices. This it is measured in milliseconds and are provided three data of great interest. The first is the upload speed, the second the download speed, and the third, an average of both values, helps to know where the error is.
In addition, the data of the tests carried out by the system are displayed. It lets you know how much has been sent, how much has been received and if there is a data loss. Interpreting this data after determining the size of a packet can lead to connection problems, which can greatly improve the browsing experience.
Why is this process so necessary?
Those people who create content or play online will be able to understand more easily the importance of this data, Ping is something important in this world.
The data packet size lets you know how fast the internet connection is and the faster it is, the better the experience of online games and data loading. Likewise, it can be said that with a suitable data packet and a few milliseconds of ping, excellent gaming experiences can be achieved.
The longer the established time, the slower the sending and receiving of data will be and with it all searches and connections that we want to make will be slowed down. A tip for improving the data is to disconnect all devices that are not used, certainly by setting the size of a packet the results will be excellent.
Finally remember that you can also ping an IP address or a webpage, and similarly you can do a custom ping with Windows PowerShell, but the processes are obviously different from what you have seen today (with similarities), so yeah , you want to know more about these and then your computer should look for more information.TagsTutorial PC